Bolt Face Diameter Chart

Bolt carrier/Bolt dimensions

I've built a batch of ppc bolts, that don't want to eject. .473 and.532 (for std magnum). All of these groups of cartridges should. I've had two 6.5 swedes built on mauser '98 actions, one commercial, one military. I'm new to this, so forgive my lack of knowledge.

Printable Flange Size Chart Printable Word Searches

If you want faster then you have to have the bolt face opened to.470 then you have lots of choices. I've had two 6.5 swedes built on mauser '98 actions, one commercial, one military. Only difference is the shell holder chart doesn't state long or short action. They're currently.447, but they seem to be a little sticky on the ejection,.

Bolt Head Size Table Bolt About

They're currently.447, but they seem to be a little sticky on the ejection, but eject freely with the bolt held in the vise. I've had two 6.5 swedes built on mauser '98 actions, one commercial, one military. I didn't kow there was a standard magnum and a regular magnum bolt face. Found this elsewhere and from looking at my shell.

Printable Bolt Size Chart Printable Word Searches

The rst database or bolt face diameter chart, is of the various cartridges that can work with the same bolt faces and action lengths. I personally like the 22/250 ai or the texas trophy hunter (6mm / 223) if the bolt has the.470 bolt face diameter. Is there a chart or something that can define what actions and bolt faces.

Common Bolt Faces Demystified (Bolt Action Centerfire) Ultimate Reloader

Imo, the folks who say mods to the bolt face or extractor are required for the swede are engaging in desktop troubleshooting. There are basically four main bolt face diameters and two action lengths that cover most cartridges, with just a few falling outside of those. I use lapua brass exclusively. The rim diameter of the 6.8 western is.535. I've.

Bolt Face Diameter Chart - What magnum bolt face is.532? They're currently.447, but they seem to be a little sticky on the ejection, but eject freely with the bolt held in the vise. All of these groups of cartridges should. .473 and.532 (for std magnum). Some times when considering a re barrel and chamber or cartridge change you need to know what round will work without bolt face and extractor work. Found this elsewhere and from looking at my shell holder reference chart it appears to be correct.

Is there a chart or something that can define what actions and bolt faces go to what cartridge? The rim diameter of the 6.8 western is.535. Neither required bolt face mods. Chamfer is good, extractor is good, so i'm thinking bolt face diameter. I have a cheat sheet/ready reference and thought i would share it with every anyone that is interested.

Some Times When Considering A Re Barrel And Chamber Or Cartridge Change You Need To Know What Round Will Work Without Bolt Face And Extractor Work.

Imo, the folks who say mods to the bolt face or extractor are required for the swede are engaging in desktop troubleshooting. I'm new to this, so forgive my lack of knowledge. Is there a chart or something that can define what actions and bolt faces go to what cartridge? The rst database or bolt face diameter chart, is of the various cartridges that can work with the same bolt faces and action lengths.

I Use Lapua Brass Exclusively.

If you want faster then you have to have the bolt face opened to.470 then you have lots of choices. All of these groups of cartridges should. Chamfer is good, extractor is good, so i'm thinking bolt face diameter. I didn't kow there was a standard magnum and a regular magnum bolt face.

.17 Remington.204 Ruger.223 Remington.243 W.308 W Thank You!

Found this elsewhere and from looking at my shell holder reference chart it appears to be correct. Which bolt face is used for these calibers, and what other calibers can be used with each particular bolt face. I personally like the 22/250 ai or the texas trophy hunter (6mm / 223) if the bolt has the.470 bolt face diameter. I've built a batch of ppc bolts, that don't want to eject.

I've Had Two 6.5 Swedes Built On Mauser '98 Actions, One Commercial, One Military.

I have a cheat sheet/ready reference and thought i would share it with every anyone that is interested. They're currently.447, but they seem to be a little sticky on the ejection, but eject freely with the bolt held in the vise. Is.02 a world of difference on the bolt face side ? Our bolts are sold as complete units only.